PRIZM Squares | installation
Prepare wall for hanging. Pad the floor below the location you will be hanging glass pieces. You’ll need a drill or screwdriver.
Step 1. Since the squares are fairly light, drilling into studs and using the provided wall anchors may or may not be necessary depending on the wall. Using wall studs and anchors however, will provide the most secure hanging. If using anchors, drill anchors into the wall where you will put the bracket. Screw the large flat side of the bracket into the anchors or the wall.
Step 2. Once the bracket is secure on the wall, pick up the glass piece and slide the groove part of the knob on the back of the glass into the negative square of the bracket on the wall.
Step 1. Since the squares are fairly light, drilling into studs and using the provided wall anchors may or may not be necessary depending on the wall. Using wall studs and anchors however, will provide the most secure hanging. If using anchors, drill anchors into the wall where you will put the bracket. Screw the large flat side of the bracket into the anchors or the wall.
Step 2. Once the bracket is secure on the wall, pick up the glass piece and slide the groove part of the knob on the back of the glass into the negative square of the bracket on the wall.
PRIZM Squares | general care
Glass squares require little maintenance. When glass becomes dusty, clean glass by soaking a cotton ball, cloth, or cotton swab in a glass cleaner and wipe on the glass to remove dust. Do NOT spray glass cleaner directly onto the art piece. Be careful not to wipe the wire with the glass cleaner. If wire needs cleaning, use a cotton swab soaked in rubbing alcohol to clean the wire.